blackJack VCO PARTLIST 2010
-------------------------------------------------------------
IC
-------------
LM13700 (1)
TL072 (3)
OP275 (1) OR TL072 (1)
TL074 (1)
DUAL MATCHED TRANSISTORS
----------------------------
SSM2210SZ OR SSM2210P (1)
OR (2) 2N2222A
0R (2) 2N3904 NPN TRANSISTORS
(1) 2N5457 TRANSISTOR
(8) 1N4148 DIODE
resistors
------------------------------------
use Metal Film 1% for best performance
1K (6)
10K (11)
100K (11)
1M (5)
10M (1)
130K (1)
18K (1)
2K TEMPCO (1)
2K RESISTOR (1)
20K (3)
200K (2)
3K (1)
49K9-51K (1)
47K (1)
470K (1)
470R (2)
4K7 (2)
capacitors
-----------------------------------
0.1uf (100nf) (10)
0.001uf (1)
10pf (1)
4.7pf-5pf (1)
0.0022uf-0.0027uf(1)
100pf (3)
0.0047uf silver mica or polystyrene (1)
1uf Electrolytic/Tantulum is better (2)
10uf Electrolytic (2)
(optional)47pf-100pf Cap that goes under the TL074, it is soldered first on the other side before TL074 IC socket.
If you forget this it is not critical, I put it to reduce spikes on the Triangle wave.
trimmers
-------------------------------------
100R Multiturn (1)
100k Multiturn (3)
1M Multiturn (1)
10k Single Turn Flat (2) Mouser part # 531-PT6KV-10K
PTC
------------------
you can place the following:
(2) FERRITE BEADS or
(2) 22R resistors with or without Ferrite Beads or
(2) Thermal resettable Fuses (PTC)
At worst just place a Jumper if you don't care about rail noise or protection.
MOUSER PART NUMBERS FOR POTS, KNOBS,
-----------------------------------------------
You need 5 Linear type B pots 50k-100k value:
858-P160KN-0QC15B50K (50k pot)-- if 100k is not in stock (5)
858-P160KN-0QC15B100k (100k pot) (5)
futurlec Alpha pots will fit on pcb also.
If you want a firm grip of PCB to Panel buy (2) Dual 100k Linear Pots
at Futurlec and it will retain the hold better. I use single pots and it works fine once installed.
Gray Soft Touch Knobs with Black Line
450-6518 (5)
(optional pcb that I have)3.5mm jacks
-----------------------------------------------------
502-35RAPC4BV4 (mouse switchcraft jack) (10)
Hook Up wire
-----------------------------------------------------
22 Gage Stranded
IDC Cable For EuroRack COnnection (POWER)
-------------------------------------------------------
(1) 16 pin Ribbon Cable
(1) IDC 16 PIN Connector
(1) 8 Double Row IDC Header
Friday, March 19, 2010
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment